What is the principle of ice maker
The ice maker automatically enters a water storage tank through the make-up water valve, and then sends the water through the flow control valve to the shunting head through the water pump, where the water is evenly sprayed on the surface of the ice maker and flows through the wall of the ice maker like a water curtain. At this time, the water will be cooled to the freezing point, and the water that has not been frozen by evaporation will flow into the water storage tank through the multi hole tank, and the cycle will start again.
When the ice made by the ice maker reaches the required thickness, the hot gas discharged by the compressor will be returned to the wall of the ice maker to replace the cryogenic liquid ice making agent. A layer of water film is formed between the evaporation pipe walls of such glaciers. This layer of water film will play a role in lubrication when the ice freely falls into the tank below under the action of gravity. The water produced by the ice maker in the ice mining cycle will return to the water storage tank through the porous tank, which also prevents the wet ice from being discharged by the machine.
1. The problem of icing inside the refrigerator may be that many consumers have some wrong methods when using it. For example, the food itself is still steaming, but it is directly put into the refrigerator. Because the internal temperature of the refrigerator is relatively low, when it is cold, water vapor will form, which will cause the problem of icing on the inner wall.
1. Preventive measures can be taken. For example, if the food is still steaming, it can't be put in directly. It can be put in only when it is cold. If you want to preserve fresh vegetables, wash them thoroughly, drain the water, wrap them in plastic bags or wrap them with plastic wrap, and then put them in. This can not only lock the water, but also help the use of the refrigerator, so as to avoid the problem of icing.